Rysa_105 said: On sony tv's, setting hdmi port to enhanced means 18 gbps hdmi compatibility. With standard hdmi, the hdmi data pipeline does not support 18 gbps bandwidth. So any resolution/refresh rate/chroma combination that needs the higher bandwidth upto 18 gbps will only work with the hdmi port set to enhanced. First, check the HDMI cable. You should use an 'Ultra High Speed' cable like the one in the Xbox box. If you are passing the HDMI signal through a receiver/soundbar, the intermediate device must support HDMI 2.1 passthrough. Few devices do so the alternative is to connect Xbox's HDMI directly to the TV, and pass audio back to the receiver If you don't see an image, you may need to change the display using the following steps. Press the Windows key. Type Adjust screen resolution and press Enter. Find Display and click the down arrow on the right side of the box. Select the appropriate output device. Click Apply, then click OK. Open Radeon™ Settings by right-clicking on your desktop and select AMD Radeon Settings. Select Display. The HDMI Scaling slider should be as shown in the example below. HDMI Scaling value defaults at 0% and can be adjusted using the slider. Move the slider to adjust the image until it fits the entire screen. NOTE! 4sIfe.

sharp tv hdmi settings